Hilti PSA 81 Original Bedienungsanleitung Seite 22

PSA 81
▶ Push the catch together.
▶ Remove the battery.
Note
Remove the battery only when the tool is switched off. Data may otherwise be lost.
PSA 82
▶ Press the spring catch in.
▶ Remove the battery.
Note
The battery can be exchanged while the tool is in operation. The built-in backup battery is
capable of powering the tool for approx. 5 minutes.
PSA 83
▶ Push the small slider on the back away from the battery compartment.
▶ Push the large slider toward the small slider.
◁ The battery is lifted.
▶ Remove the battery.
5.3 Charging the battery 4, 6,
PSA 80
▶ Make sure the system to be charged is standing securely.
▶ Remove the battery. → page 15
▶ Connect the supply cord and the battery to the PUA 80 charger.
◁ The battery is charging
Note
Charge the battery for at least 14 hours before using it for the first time.
▶ When the battery is fully charged, disconnect the battery from the charger.
▶ Insert the battery in the tool. → page 15
PSA 81
▶ Make sure the system to be charged is standing securely.
▶ Remove the battery. → page 15
▶ Connect the PUA 81 AC adapter to the battery.
◁ The battery is charging
Note
Charge the battery for at least 2 hours before using it for the first time.
Alternatively, you can use the motor vehicle power adapter to charge the PUA 82 battery.
▶ Press the button on the top of the battery.
◁ Charge status is displayed
▶ Insert the battery in the tool. → page 15
PSA 81 (05)
▶ Make sure the system to be charged is standing securely.
▶ Remove the battery. → page 15
▶ Connect the PUA 85 19V charger to the battery.
◁ The battery is charging.
Note
Charge the battery for at least 2 hours before using it for the first time.
Alternatively, you can use the PUA 82 motor vehicle power adapter or the PUA 81 AC adapter
to charge the battery.
16 English
Printed: 19.08.2016 | Doc-Nr: PUB / 5070487 / 000 / 01
5