Hilti PSA 81 Original Bedienungsanleitung Seite 21

Operating temperature
Storage temperature (dry)
Charging temperature
Weight
Rated supply current
AC frequency
Rated power
Rated voltage
IP protection class
Operating temperature
Storage temperature (dry)
Charging temperature
Weight
5 Operation
5.1 Inserting the battery
PSA 80
▶ Hold the battery end cap so that it is facing you and the large groove on the battery is on the left.
▶ Slide the battery into the battery compartment.
▶ Turn the end cap clockwise until it engages.
PSA 81
▶ Push the battery in until it engages securely.
▶ Check that the battery is securely seated in the tool.
PSA 82
▶ Insert the battery at an angle into the battery compartment.
▶ Push the battery into the battery compartment until it is heard to engage.
▶ Check that the battery is securely seated in the tool.
PSA 83
▶ Insert the end of the battery in the battery compartment.
▶ Push the battery into the battery compartment until it is heard to engage.
▶ Push the small slider on the back toward the battery compartment.
▶ Check that the battery is securely seated in the tool.
5.2 Removing the battery
PSA 80
▶ Turn the end cap counterclockwise.
▶ Remove the battery from the tool.
Note
Remove the battery only when the tool is switched off. Data may otherwise be lost.
Printed: 19.08.2016 | Doc-Nr: PUB / 5070487 / 000 / 01
PUA 80
0 ℃ ... 40 ℃
−30 ℃ ... 85 ℃
•/•
0.36 kg
PUA 85 19V
115 V ... 230 V
50 Hz ... 60 Hz
65 W
19 V
•/•
0 ℃ ... 40 ℃
−20 ℃ ... 75 ℃
0 ℃ ... 40 ℃
0.23 kg
2
3
PUA 81 PUA 82
0 ℃ ... 40 ℃ 0 ℃ ... 40 ℃
−25 ℃ ... 60 ℃ −20 ℃ ... 85 ℃
0 ℃ ... 40 ℃ 0 ℃ ... 40 ℃
0.23 kg 0.24 kg
PSA 85
100 V ... 240 V
47 Hz ... 63 Hz
40 W
8.4 V
56
−20 ℃ ... 40 ℃
−25 ℃ ... 85 ℃
0 ℃ ... 45 ℃
0.54 kg
English 15