Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Thank you for purchasing our Panasonic Room Air
Conditioner.
CONTENTS
: Features ..................................................... 1
: Safety Precautions ................................... 2
: Name of Each Part ................................ 3~4
I Accessories
: Preparation Before Operation ................. 5
: How to Operate ..................................... 5~6
: Setting the Timer ...................................... 7
: Convenience Operation ........................... 7
: Care and Maintenance ......................... 7~8
Extended Period of Time
: Helpful information ................................... 8
: Energy Saving and Operation Hints ....... 8
: Troubleshooting ....................................... 9
Note:
Before using your air conditioner, please read
this operating instructions carefully and keep it
for future reference.
1
FEATURES
G Self-illuminating Button
For your convenience to operate in the dark.
G Automatic Operation
Sense indoor temperature to select the
optimum mode.
G Soft Dry Mode
Designed to be used when temperature is rather cool
but the humidity is high.
G Airflow Direction Auto-Control
Vertical airflow direction louver automatically swings
up and down.
G Air Circulation Mode
Circulates heated air downward, thus increasing
heating effectiveness.
G ON / OFF Dual Setting Timer
To program the room air conditioner to turn itself on
and to ensure you maximum comfort when sleeping.
G Sleep Mode
Prevent the room from getting too hot or too
cold while you are sleeping.
1) If the supply cord is damaged or needed to be replaced,
it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
2) Remove power plug or disconnect from the main before
(Refer page 4)
servicing this appliance.
3) Do not repair by yourself.
In case of malfunction of this appliance, do not repair by
yourself. Contact the sales dealer or service dealer for a
repair.
4) Turn off the power (Isolation from main power supply).
Pull off the power plug from the receptacle, or switch off
the breaker, or switch off the power disconnecting mean
(Refer page 5~6)
to isolate the equipment from the main power supply in
case of an emergency.
DISCONNECT THE MAIN PLUG FROM THE SUPPLY
SOCKET WHEN NOT IN USE, WHERE SUPPLY
(Refer page 5~6)
CONNECTION IS VIA MAIN PLUG.
Airborne noise.
A-weighted sound pressure level of this appliance is less than
70dB (A) under the JIS C 9612 test conditions.
Maximum cooling operation
1 m from the unit
(Refer page 6)
Replacement or installation of power plugs shall be performed
by authorised/qualified personnel only.
The wires in this main lead are coloured in accordance with
the following code:
(Refer page 6)
Green and Yellow
Blue
Brown
"As the colours of the wires in the main lead of this
appliance may not correspond with the coloured markings
(Refer page 7)
identifying the terminals in your plug, proceed as follow:
The wire which is coloured green and yellow must be
connected to the terminal in the plug which is marked by the
letter E or by safety earth symbol ! or coloured green or
green and yellow.
The wire which is coloured blue must be connected to the
(Refer page 7)
terminal which is marked with letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with letter L or coloured red."
!
Warning
!
Caution
IMPORTANT
:
Earth
:
Neutral
:
Live
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
