Activating/Deactivating The Alarm - Hama RC 660 Bedienungsanleitung

• By default, in normal mode (LOCK) the
time for alarm 1 (2) is displayed.

Activating/deactivating the alarm

• Press the HOUR/MONTH button (9)
once or repeatedly and hold it for about
3 seconds to enable or disable one of
the alarms.
• If an alarm is activated, the
corresponding symbol (
displayed.
Select alarm mode
• Move the ALARM SELECT slide switch
(13) to the WORKING DAY position.
• If alarm 1 or alarm 2 is activated, the
weekday alarm only triggers an alarm
on weekdays (Monday to Friday). ALW
(7) appears on the display.
• Move the ALARM SELECT slide switch
(13) to the NORMAL position.
• If alarm 1 or alarm 2 is activated,
the normal alarm triggers an alarm
daily. The display does not show any
additional indicator.
Note – Alarm mode
Selecting an alarm mode (WORKING
DAY or NORMAL) only has an effect if
an alarm is enabled.
Alarm mode exit/snooze function
• If the alarm is triggered, the alarm
symbol /
an alarm will sound.
• Press any button (except the SNOOZE/
6
or ) is
will begin to flash and
LIGHT button (7)) to stop the alarm.
• Otherwise, it will stop automatically
after 2 minutes.
Note – Snooze function
While the alarm signal is sounding,
press the SNOOZE/LIGHT button (7)
to activate the snooze function. The
alarm symbol
begin to flash. The alarm signal will be
stopped for 5 minutes, after which it
will sound again.
5.5. Backlight
• If you press the SNOOZE/ LIGHT
button (7), the display will light up for
approx. 10 seconds.
• The alarm clock is equipped with a
twilight sensor (7) that automatically
switches on the backlight of the display
(10) to a dimmed setting as soon as
it gets dark.
• During the day or if there is enough
light, the twilight sensor (7)
automatically switches off the dimmed
backlight on the display.
• Move the SENSOR OFF/ ON slide
switch (11) to the SENSOR ON or
SENSOR OFF position to activate or
deactivate the twilight sensor (7).
/ and will