Basic Remote Scanning - Canon imageRUNNER 2202N Kurzanleitung

Basic Remote Scanning

Remote Scanning is a scanning method in which scans are loaded to a TWAIN-compliant application (such
as Adobe Photoshop, Adobe Acrobat, and Microsoft Word/Excel/PowerPoint 2000 or later) on your computer
desktop. This section describes the flow of basic remote scanning operations. For more details, see e-Manual
> Scanner.
NOTE
Before remotely scanning your originals, you must set the machine configurations, and install the scanner driver in the
computer. For more information, see the e-Manual.
01
Press [ ] (COPY/SCAN).
If a log in screen for Department ID Management
appears, you must enter the applicable authentication
information (ID, password/PIN).
02
Place your originals.
NOTE
For help, see e-Manual > Basic Operations.
03
If you are scanning for the first time
after the driver installation, select the
ScanGear MF as the scanner to be used.
04
Open a TWAIN-compliant application
on your computer desktop.
05
Select the command to start scanning
operation (such as [Scan New] or [Acquire]).
NOTE
For help, see the documentation provided with your
application.
06
Specify the scan settings that suit your
preferences.
NOTE
For help, see e-Manual > Scanner.
32

Basic Remote Scanning

07
Click [Scan].
■For Windows
■For Macintosh
When scanning is complete, the ScanGear MF Main
Window closes, and the scanned image is transferred to
the application.
08
When scanning is complete, remove
your originals.
If a login service such as Department ID Management
has been set, press [ ] (Log In/Out) to log out.