Technical Data - Desoutter K190B3CWY Ursprüngliche Betriebsanleitung

TECHNICAL DATA

Fig. 1
TECHNICAL DATA
Fig. 1
D i s c o n n e c t t h e m a c h i n e f r o m t h e
c o m p r e s s e d a i r s u p p l y . R e m o v e a l l
accessories.
Before disassembling the machine, decompress
the air from the oil tank by loosening and re-
tightening the screw (614.02).
At each disassembly of the governor, clean the
spring housing, check the condition of the spring
Fig. 2
and re-lubricate it carefully.
Fig. 2
The governor has a calibrated spring which
can only be replaced by an original spare
part.
When re-assembling, always position the cylinder
exhaust on the opposite side of the turbine
housing.
Overspeed air shut-off device
Be particularly careful with the speed governor and
the overspeed air shut-off device. Careless
maintenance or treatment may prevent them from
functioning correctly. If the machine stops suddenly
or does not reach rated speed when connected to
the air supply, the overspeed shut-off device may
have closed the inlet air.
The machine must imperatively be dismantled and
checked before resetting the overspeed shut-off
device (see drawings below).
02/2013
03/2015
K1120B3CWY - K190B3CWY
K190B4Y - K160B6Y
Ø15mm mini (5/8")
DISASSEMBLY AND REASSEMBLY INSTRUCTIONS
Ø15mm mini (5/8")
7m max.
7m max.
1
5 / 56
Pmin 4.0 bar
Pmin 4.0 bar
5 / 56
6159947050_08
6159947050_04
Part no 6159947050
Series: C
Issue no 03
Series no C
Date 09/2008
Page 9 / 44
Pmax 6.3 bar Ø12.5 mm (1/2")
Pmax 6.3 bar Ø12.5 mm (1/2")
ISO VG15
ISO VG15
OK
2
1
2
3
30 N.m
Series: C
OK
4