Improper Use; Warranty - Cattini Oleopneumatica YAK CANGURO Bedienungsanleitungen

2. Position the jack under the supports as described in the manual of the vehicle
the manufacturing company is not responsible for any break or damage to the lifted vehicle or to persons or
property due to an incorrect use of the jack.
3. Insert the handle in the fitting on the pump for lifting. DWG. 9
4. Lifting: Pump the handle along its whole length, from top to bottom, until the jack has reached the position
wanted. DWG. 9
5. Lowering: Turn the knob that is under the lifting lever counter clockwise. DWG. 10
- Being able to lift the load exploiting maximum piston stroke is fundamental. There are, in fact, 11 lifting positions: 8
positioning the bracket in the slots (the bracket can be turned upside down); 3 lifting the load directly above the piston,
also using the extensions. DWG. 11
REMEMBER THAT THE JACK IS A LIFTING DEVICE AND NOT A SUPPORTING DEVICE!!
- Before working with the jack, it is advisable to perform a few operations with no load in order to acquire the sensitivity
necessary to work safely with the jack.
- Transport: to transport the jack, put the handle in the idle position - in the vertical slot - and it will then be very easy to
transport it, levering on the wheels. DWG. 12
ACCESORIOS A DEMANDA
-Son disponibles, a demanda, prolongaciones o adaptadores de altura (prolongació n larga de 120mm y prolongació n corta
de 70mm) y un platillo de dientes circulares (platillo 10mm).
THE MANUFACTURER IS NOT LIABLE FOR ANY DAMAGE RESULTING AS A
CONSEQUENCE OF DISREGARD FOR THE ABOVE INDICATIONS AND THE

Improper use

The air-hydraulic jack has been designed and made to lift transport vehicles. Any other use of the jack, such as for
instance lifting and/or moving persons, is considered to be definitely improper.
Any use of the jack not in conformity with the safety rules listed in this manual is considered to be improper use.

WARRANTY

This jack is covered by a 12-month warranty starting from the date the warranty comes into effect or from the date the
jack leaves our factory if it has not already been rendered effective on-line; it covers all manufacturing defects but not
transport expenses, defects caused by improper use or damages suffered during transport. For more details please see
the card attached to this manual.
NEVER USE MORE THAN TWO EXTENSIONS!
WARRANTY CONDITIONS ARE INVALIDATED THEREOF!
ES
38