Maintenance Reserved To A Professionally Qualified Engineer - Cattini Oleopneumatica YAK CANGURO Bedienungsanleitungen

EN
up the oil in the tank make certain the oil you are using is compatible with what is already inside the tank so as not to
compromise machine integrity. DWG. 14
OLII COMPATIBILI:
AGIP ACER 15
RENOLIN B4
MAINTENANCE RESERVED TO A PROFESSIONALLY QUALIFIED
ENGINEER
Having to carry out maintenance or overhauling, use exclusively genuine spare parts to ensure the utmost reliability for
the jack.
PROBLEMS
Solutions
THE JACK DOES NOT LIFT THE LOAD
- Check the oil level by means of the screw (726).
- There is dirt underneath the valves: loosen the cap (518), remove the bearings and springs and blow inside, to
thoroughly clean it. Next, reassemble and if necessary knock the bearings again (40) and (521).
THE JACK LIFTS, BUT COMES DOWN UNDER THE LOAD
- There is dirt underneath the valves: loosen the cap (518) and clean thoroughly, then reassemble and if necessary
knock the big bearing (521).
- Check that the drain valve (836) is properly tighten.
TO LUBRICATE, USE ONLY MOLYBDENUM BISULPHIDE GREASE AGIP = CRSM MOBIL =
MOBILGREASE SPECIAL ESSO = BEACON Q2 SHELL = RETINAX AM BP = LTX 2 M
15