Packing; Use - Cattini Oleopneumatica YAK CANGURO Bedienungsanleitungen

ES
- Never lift loads on sloping, uneven or soft ground. DWG. 6
- If extensions are needed use only those supplied by the manufacturer with the jack. Do not use extensions
without the relevant plate. Never use more than two extensions. DWG. 5
- Do not lift the load in a confined space so as not to run the risk of getting trapped. DWG. 7
- It is forbidden to use more than one jack simultaneously on the same load.
- Never tamper with the pressure relief valve that has the guarantee seal. DWG. 8

PACKING

- The body, handle and other parts of the jack are packed in a three-layer corrugated cardboard box with pallet; the
operating and maintenance manual plus the warranty certificate in a folder are also inside the box.
- The instruction "Keep upright" is clearly visible on the cardboard box containing the jack.
- Depending on the number of jacks shipped, pallets of different sizes are used.
- Either transpallets or forklift-trucks are used for handling.

USE

- Strictly abide by the safety rules and regulations described previously.
1. Remove the handle and jack from the box and fit the handle vertically for handling.
37