Side-Discharging The Clippings - Toro 20897 Bedienungsanleitung

Figure 31
Removing the Grass Bag
1. Route the starter rope around the lower-rope
guide (Figure 32).
Figure 32
2. Lift the grass-bag handle out from the grooves
at the top of the machine, and remove the bag
from the machine
Figure 33
3. Insert the mulch plug
(Figure 33).
(Figure 34).
g010268
Side-Discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the grass bag is on the machine, remove it before
side-discharging the clippings; refer to
Grass Bag (page
Important:
The machine has a safety switch that
prevents you from starting the machine unless
you first install the mulch plug securely on the
machine; refer to
g010269
13).
Installing the Side-Discharge
Chute
Unlock, unlatch, and lift up the side deflector and
install the side-discharge chute
g010270
15
Figure 34
Removing the
15).
Mulching the Clippings (page
(Figure 35).
Figure 35
g005309
g236532