Cleaning And Care; Troubleshooting - Klarstein 10034161 Handbuch

CLEANING AND CARE

Note: Turn off the unit and unplug it from the power outlet. Wait until the unit has
completely cooled down before cleaning it.
• Use a vacuum cleaner to clean the ventilation slots and grilles.
• Remove dust on the outside surfaces with a damp (not wet) cloth.
• Do not use strong cleaning agents or abrasives.
• Do not spray the device with liquids or immerse it in water or other liquids.
• Never open the heater housing.
Storage
Keep the unit in a dust-free place during the low season. Pack it in the original carton.
Wind the heater cable cleanly to avoid damaging the cable.

TROUBLESHOOTING

Problem
The device is not running.
It smells strange the first
time you use it.
Vibrations and noises.
Possible cause
The plug is not plugged in.
The socket does not carry
electricity.
The power switch on the
rear is turned off.
The unit is new.
The unit is uneven.
The unit is broken.
Suggested solution
Insert the plug into the
socket.
Use a different outlet.
Turn on the power switch.
The smell disappears after
repeated use.
Place the appliance on a
level surface.
Have the device checked
and repaired by a
specialist company.
EN
17