Klarstein 10034161 Handbuch Seite 16

EN
16
Remote Control
On/Off For switching the heating on and off.
Swing Press this button to switch the Swing
function on and off. When the function
is in operation, the airflow moves
horizontally from side to side and the
corresponding symbol lights up on the
display.
Mode Press this button to scroll through the
three available modes: Fan, Low Heat
Output and High Heat Output.
Timer Press repeatedly to increase the running
time in 1-hour increments. The timer can
be set between 1-12 hours. The display
shows the currently set time. When the
timer is active, the [h] symbol lights up
next to the display. To cancel the timer,
press the timer button repeatedly until
[00] is displayed.
Light Press this button to scroll through
the options for the light: Off, White,
Green, Purple or Blue. The light can be
operated independently of the fan.
Temp+ Increase the room temperature.
Temp- Reduce room temperature.
Replace batteries
Turn the remote control upside down and press tab A to the right. Slide the battery
compartment B out. Replace the battery with the same type and make sure the positive
side is facing up.