Installation Steps; Package Contents - Axis P1311 Installationsanleitung

AXIS P1311 Installation Guide
This installation guide provides instructions for installing an AXIS P1311 on your network. For all
other aspects of using the product, please see the User's Manual, available on the CD included in
this package, or from www.axis.com

Installation steps

Follow these steps to install the AXIS P1311 on your local network (LAN):
1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 5.
4. Assign an IP address. See page 6
5. Set the password. See page 9

Package contents

Item
Network camera
Indoor power supply
(country specific)
Power block connector
Terminal block connector
Camera stand
CD
Printed Materials
AXIS P1311
Installation Guide
Models/variants/notes
AXIS P1311
Europe/UK
Australia
USA/Japan
Argentina
Korea
2-pin connector block to provide power to external devices connector
4-pin connector block for connecting external devices to the I/O terminal
connector
Supplied with mounting screws
AXIS Network Video Product CD, including product documentation, installation
tools and other software
AXIS P1311 Installation Guide
Axis Warranty Document
Extra serial number label
Important!
This product must be used in
compliance with local laws and
regulations.
Page 3