Connecting Hoses/Pipes; The Fitting Of Accessories - Swim & Fun Inverter PRO series Handbuch

4.4. Connection with 38-32 mm hose adaptor
Connection with 50 mm pipe
4.5. The fitting of accessories
98
Position the supplied anti-vibra-
tion pads as shown in the picture.
If you would like to drain conden-
sate
through the hose, you can install
the included drainage diverter.
IMPORTANT: Raise the heat
pump. If you tip it over or turn it,
you can damage the compressor.
MV-1225-1226-1298-11-2018 . © All rights reserved Swim & Fun Scandinavia ApS
UK