Symbol Description - Swim & Fun Inverter PRO series Handbuch

Usage parameters d0 to d11
Code Condition
d0 IPM temperature
d1 Water temperature (inlet)
d2 Water temperature (outlet)
d3 Ambient temperature
d4 Frequency limitation code
d5 Pipe temperature
d6 Exhaust gas temperature
d7 Step of EEV
d8 Compressor working frequency
d9 Compressor current
d10 Fan Speed
d11 Error code for the last time
Remark: d4 Frequency limitation code, 0: No frequency limit; 1: Coil pipe temperature limit; 2: Overheating or overcooling
frequency limit; 4: Drive Current frequency limit; 8: Drive voltage frequency limit; 16:Drive high temperature frequency limit
Usage parameters P0 to P7
Code Name
P0 Mandatory defrosting
P1 Work setting
P2 Timer on/off
P3 Water pump
P4 Current time
P5 Timer ON
P6 Timer off
P7 Inlet water temp. correction

Symbol description

102
Area of application
0-1
0-1
0-1
0-1
HH:MM
HH:MM
HH:MM
-9~9
Symbol for heat.
The light will be on when it is in operation. When defrosting, the light will
flash.
Symbol for cooling. The light will be on when it is in operation.
Symbol for automatic stop. The light will be on when it is in operation.
Symbol for automatic start, the light will be on when it is in operation.
MV-1225-1226-1298-11-2018 . © All rights reserved Swim & Fun Scandinavia ApS
Scope
0-120 °C
-9 °C ~ 99 °C
-9 °C ~ 99 °C
-30 °C ~ 70°C
0, 1, 2, 4, 8, 16
-30 °C ~ 70 °C
0 °C ~ C5 °C (125 °C)
0~99
0~99Hz
0~30A
0-1200 (rpm)
All error codes
Default
0
1
0
0
00:00
00:00
00:00
0
UK
Remark
Real testing value
Real testing value
Real testing value
Real testing value
Real testing value
Real testing value
Real testing value
N*5
Real testing value
Real testing value
Real testing value
Remark
0: Default normal operation
1: mandatory defrosting
1 Heating mode,
0 Cooling mode
1 Timer on/off is in opera-
tion, 0 Timer on/off does not
function (The setting of P4
and P5 will not work)
1 Always running, 0 De-
pends on the operation of
the compressor
0-23:0-59
0-23:0-59
0-23:0-59
Default setting: 0