Kenwood TT720 series Handbuch Seite 3

●
If subsequent toasting is carried out
the toaster will use the last setting
selected. However, if the toaster is
unplugged then it will automatically
default to setting 3 when it is next
used.
2 Insert the bread, muffins etc.
3 Press the carriage button which will
illuminate and the carriage will
automatically lower.
●
To stop toasting at any stage, press
the carriage button.
4 All the indicator lights below the
selected setting will glow and as the
toasting operation progresses the
lights will go off one by one as the
time reduces.
5 Approximately 8 seconds before the
toasting operation has finished the
toaster will emit an audible sound to
indicate that toasting is near
completion.
6 At completion the carriage will
automatically rise allowing the toast
to be removed. After a few seconds
if the toast is not removed the
carriage will automatically lower and
the keep warm function will operate.
During this time the toaster heating
elements will glow on and off with a
faint audible "click" and the indicator
lights will flash.
7 Your toasted item can be removed
at any time during the keep warm
function by using the carriage/cancel
button but will be ejected
automatically after approximately 5
minutes.
●
To toast bagels, place the bagel with
its cut sides innermost. Press the
bagel button then press the carriage
button, both buttons will glow.
Note when toasting bagels the
elements on the two inside slots will
toast with a higher heat than those
on the outside
●
To toast frozen bread, press the
defrost button, then press the
carriage button, both buttons will
glow.
●
To toast frozen bagels press both
the defrost and bagel buttons, then
press the carriage button, all buttons
will glow.
hints on using your
toaster
●
Select a lower setting for light
browning, for toasting one slice only
or for dry bread.
●
When toasting a single slice of
bread, you may notice a variation in
toast colour from one side to the
other - this is normal.
●
Dry/stale bread toasts more quickly
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
●
For best results ensure that the
bread slices are of an even
thickness, freshness and size.
●
In order to achieve uniform browning
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. Alternatively
select a lower setting when
additional toasting is carried out.
warming rack safety
1 Never completely cover the warming
rack.
2 When using the warming rack, never
wrap the food up. Plastic wrapping
will melt and could catch fire. Foil will
reflect heat, damaging the toaster.
3 If you're using the toaster slots,
always remove the warming rack so
it can't burn you.
3