Transport, Installation And Assembly; Transport, Storage - Siemens 1FT703 series Betriebsanleitung

You will find more technical details, e.g. motor dimensions, in the catalogs NC 60, NC 61,
D21.1 or Configuration Manual.
4

Transport, Installation and Assembly

4.1

Transport, Storage

Observe the transport regulations applying in the country/countries concerned.
Use suitable load suspension devices for transport and assembly.
Use lifting eyes for transporting the motors where these are provided by the manufacturer.
Lifting tackle as per 98/37/EU Directive for Machines, Appendix I.
The motor weight is indicated on the rating plate.
Fig. 2 Lift and transport with suspension bands
The motors should be stored indoors in dry, low-dust and low-vibration (v
rooms. The motors should not be stored longer than two years at room temperature
(+5 °C to +40 °C) (41 °F to 104 °F) to retain the service life of the grease.
Siemens AG
Danger during lifting and transporting procedures!
Improper handling, unsuitable or defective devices, tools etc. can
cause injuries and/or property damage.
Lifting devices, ground conveyors and lifting tackle must correspond
to the valid regulations.
ENGLISH
WARNING
610.40 075.21
< 0,2 mm/s)
eff
13