Power Supply - MADRIX LUNA Kurzanleitung & Technisches Handbuch

Power Supply

Be careful when handling the device and electrical power! To supply the unit with
power, first connect the provided power cable to the unit ('Power') and then
to a suitable power outlet. The device uses mains voltage (AC 100 V – 240 V)!
CAUTION!
DO NOT OPEN THE UNIT. RISK OF ELECTRICAL SHOCK.
Description Of Status LED Codes
The following tables describe the LED status codes on the front of the device.
STATUS
Powered off
Permanently green
Blinking green
STATUS
Powered off
Permanently green
Blinking green
STATUS
Powered off
Blinking green
5
EN
STATUS LED POWER
Power cable not connected.  The device has no power.
Connected to power.
Bootloader activated.  Reset device / upload firmware.
STATUS LED ETHERNET
Ethernet not connected
or the device has no power.
Connected to Ethernet.

No data is sent or
received over Ethernet.
Communicating over
Ethernet.

Sending or receiving data
over Ethernet.
STATUS LED DMX-IN
DMX not connected
or the device has no power.
Receiving data via DMX-IN.

The input port works.

The power is on.
STATUS LED USB
USB not connected
or the device has no power.
Connected to USB.

No data is sent or
received over USB.
Communicating over
USB.

Sending or receiving data
over USB.
STATUS LED DMX-OUT
DMX not connected
or the device has no power.
Sending data to DMX-OUT.

The output ports work.