ECOVACS DEEBOT N79S Benutzerhandbuch Seite 16

3. Operating and Programming
3
Edge Cleaning Mode
■ This mode is good for cleaning the edges
and corners of a room. In Edge Cleaning
Mode, DEEBOT cleans along a border using
MAX suction power (e.g. wall).
■ To start Edge Cleaning Mode, press the
Edge Cleaning Mode Button on the Remote
Control.
4 Single Room Mode
■ This mode is used when DEEBOT only
needs to clean a single room. To start Single
Room Cleaning Mode, press the Single
Room Mode Button on the Remote Control.
* The room must be contained for Single
Room Mode to function properly. Close
doors to the room entrance and exit to
contain the room.
* Use the App to adjust the suction power of any Cleaning Mode already in process.
5
Return to Charger Mode
■ When battery power gets low, DEEBOT
automatically switches to Return to Charger
Mode and returns to the Charging Dock to
recharge itself.
* DEEBOT can also be sent back to the
Charging Dock at any time by pressing the
Return to Charger Button on the Remote
Control.
14
EN