ECOVACS DEEBOT N79S Benutzerhandbuch Seite 13

4
Charge DEEBOT
■ Place DEEBOT on the Charging Dock
making sure the Charging Contacts on
DEEBOT and the Charging Dock Pins make
a connection.
■ Charge DEEBOT for at least 4 hours before
the first use.
* Make sure to turn the robot's Power Switch on before charging.
* button blinks when DEEBOT is charging.
charged.
5
Start
■ Press the button on DEEBOT or the AUTO Mode Button on the Remote Control. DEEBOT
starts to work immediately in AUTO Cleaning Mode.
* To choose another Cleaning Mode, please refer to section 3.3 Cleaning Mode Selection for
details.
* DEEBOT can be directed using the Direction Control Buttons on the Remote Control when it
is paused.
3. Operating and Programming
button stops glowing after DEEBOT is fully
11
EN