Turning Power On/Off; Turning On The Main Power - Sharp PN-85TH1 Installationsanleitung

Caution
• Turn on the monitor first before turning on the computer or
playback device.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.

Turning on the main power

Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• For a complete electrical disconnection, pull out the main plug.

Turning Power On/Off

Turning power on/off
Press the POWER button to turn the power ON/OFF.
You can also turn the power ON/OFF by pressing the
MONITOR ON button/MONITOR OFF button on the remote
control unit.
Blue lit
Orange lit
Blue flashing
TIPS
• You can fix the input mode that appears after startup. Set
START INPUT MODE on the SETUP menu.
Caution
• When the power is turned off, any data in Direct Drawing
for Android is lost.
If Direct Drawing for Android is running, a message will
appear. Save any data you need.
• If the monitor will be turned off by SCHEDULE, OFF IF NO
OPERATION, RS-232C control or LAN control, save any
data you need in advance. The power will turn off even if
there is unsaved data. (The data will be lost.)
Power LED POWER button
Status Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode
7
E