Inhaltsverzeichnis - Whale Twist Montageanleitung

CONTENTS
1. Principles of Operation
2. Application
3. Warnings
4. Parts list: Straight Housing Option
5. Installation: Straight Housing Option
6. Parts list: Angled Housing Option
7. Installation: Angled Housing Option
8. Plumbing - All models
9. Maintenance
10. Instructions for use
11. Trouble Shooting
12. Winterizing
13. Service Support Details
14. Patents and Trademarks
0
LIST OF IMAGES
Fig 1 Straight Housing - Complete product
Fig 2 Straight Housing - Width and height
restrictions
Fig 3 Straight Housing - Drill hole
Fig 4a Straight Housing - Insert housing
through hole
Fig 4b Straight Housing - Secure locking nut
Fig 5 Straight Housing - Insert hose
Fig 6 Angled Housing - Complete product
Fig 7 Angled Housing - Width and height
restrictions
Fig 8 Angled Housing - Drill hole
Fig 9 Angled Housing - Insert housing
through hole
Fig 10 Angled Housing - Tighten screws
Fig 11 Angled Housing - Insert screw covers
Fig 12 Angled Housing - Insert hose
Fig 13a Plumbing arrangement - Mixer models
Fig 13b Fitting plumbing - Mixer models
Fig 14 Plumbing and hose installed (shows
valve in locked position)
Fig 15 Hose plumbing connection -
Cold only models
Fig 16 Maintenance - for mixer models
a, b, c
Fig 17 Operation - Removing handset for use
Fig 18 Operation - Twist handset to adjust
flow and temperature
Read the following carefully before installation
WARNING:
Please note that incorrect installation may invalidate
the warranty.
To the Fitter:
Check that the product is suitable for the intended
application, follow installation instructions and ensure all
relevant personnel read the points listed below.
Also ensure that these installation instructions are passed
on to the end user.
To the User:
Read the following instructions carefully.
EN
5