Instructions For Use - Whale Twist Montageanleitung

EN

10 INSTRUCTIONS FOR USE

STEP 1.
Pull handset gently from the housing.
(See Fig. 17)
STEP 2. Set flow / temperature. (Temperature
settings do not apply for cold only models)
Twist handset to desired flow / temperature
setting. (See Fig. 18)
CAUTION: For health and safety reasons, temperature
should be set at 38ºC (100 ºF). Higher settings will
increase the risk of scald injury. Those at greatest risk
of scald injury include children, the elderly, disabled,
and diabetics.
STEP 3.
Enjoy showering.
AFTER USE:
STEP 1.
Twist upper part of handset to the 'off' position
N.B. Ensure handset is fully closed before stowage.
STEP 2.
Replace handset in holder.
16
Fig 17
Fig 18
Temperature / flow indicator