Indel B KD 50 SMART G Gebrauchsanleitungen Seite 33

KD 50 SMART G
SMART SYSTEM operation method: functioning
The SMART SYSTEM controls the turning on and off of the compressor based on the presence or absence
of the guest in the room. The use of the SMART SYSTEM requires the presence in the room of an
Energy Saver device: a card-holder designed to save energy.
The guest enters the room and inserts the card into the card holder; the Energy Saver device sends a signal
to the SMART SYSTEM to indicate that a guest is present in the room and the minibar compressor
stops (the products inside the minibar remain cold for a long time due to the cold released by the
coldholding plate). When the guest leaves the room and removes the card from the Energy Saver holder,
another signal is sent to the SMART SYSTEM and the minibar turns on again. If the guest remains in
the room for many hours and the cold accumulated in the eutectic plate runs out, the minibar turns
on automatically to keep the products cold. If the room is not occupied for a long time, the minibar
operates in high energy saving mode.
Attention!
With the SMART SYSTEM operation method, timer and standard operation methods are not used.
KD 50 SMART G is set from factory on STANDARD operation method.
KD 50 SMART G_20-11-2017
ENGLISH
31