Herunterladen Inhalt Inhalt Diese Seite drucken

Scope Of Delivery - Fral FSC09.1 Bedienungsanleitung

Mobiles lokales klimagerät
Vorschau ausblenden Andere Handbücher für FSC09.1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EASY TO OPERATE AND TO EASY TO MOVE AROUND
• The unit can be moved easily on rollers from room to room.
• The air quantity can be adjusted via up to three ventilation levels.
• The cold air flow can be very strong and reach up to 5 or 6 metres.
• Installation by a specialist is not required.
• Simply plug into a normal household socket with an operating voltage of 220-240V/ 50Hz.
• The extract air hose can be stored in the unit for transport and when not in use.
• This unit operates in accordance with the heat pump principle. On account of the special, innovative. construction of the unit, its heating function is extremely efficient
compared to conventional heating units.
• Do not connect the hot air hose to the ventilation ducts. It may result in damage not covered by warranty protection. Free flow of hot air from hot air hose to the
environment should be provided.
• Do not extend the hot air hose. It may result in damage not covered by the warranty protection.

SCOPE OF DELIVERY

1 x unit
1 x remote control
1 x air hose 150 cm
1 x air hose connector
1 x bracket air hose
1 x sir outlet grid
CAUTION!: INSTALLATION BRACKETS EXTEND VERTICALLY UPWARDS AS SHOWN BELOW
THE BRACKETS ARE REMOVED FROM THE UNIT BY PULLING VERTICALLY TO THE TOP AND INSTALLED BY SLIDING VERTICALLY DOWN.
BEFORE INITIATION:
1. To avoid damage, place the unit in an upright position for at least 2 hours before initiation. Cooling
agent must stabilize.
2. Turn the extract hot air hose in the direction of the arrow 1 displayed and remove it from the unit.
3. Turn the extract hot air hose in the direction of the arrow 2 displayed and connect it to the unit.
4. Plug the power plug into a socket. Never pull the plug out of the socket with force using the con-
nection line. This can damage the power cable.
5. Since the unit emits hot air, please observe a sufficient minimum safety distance to each wall.
6. Despite the splash water protection, you should not operate the unit in moist areas, or exposed
to rain.
7. The colour of the unit can change slightly due to direct solar radiation.
8. The unit is equipped with a special thermal deactivation. This protects the unit from overheating
in extreme ambient conditions.
9. Please place the unit so that the air inlet is not impeded, e.g. by furniture or curtains, since this
can negatively effect the capacity.
10. Do not expose direct sunlight to shine on the unit, since it may then overheat and automatically
deactivate on account of the thermal deactivation.
DIFFERNT WAY OF REMOVING/INSERTION WILL BREAK FASTENERS IN THE UNIT.
1 x filter top
1 x filter bottom
1 x operating instructions
1 x drainage hose 50 cm
2 x sealing plug
12

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Fsc14.1

Inhaltsverzeichnis