Technical Data - Fral FSC09.1 Bedienungsanleitung

Congratulations on purchasing portable type FRAL air conditioner.
Please read the operating instructions carefully before connecting your unit to the power supply in order to prevent damage from improper use and keep
these operating instructions for any questions which may arise in future. Pay special attention to the safety instructions. The use of electrical devices requires
the observance of basic safety precautions to reduce the risk of fire, electric shock and/or injury.
SECURITY
• The unit is designed for indoor use (conditionally outside)
• The unit is not designed to cool the rooms, which are the source of heat with a thermal capacity greater than the capacity of the air conditioner
• Simply plug into a grounded electrical outlet with an operating voltage of 220-240V/50Hz
• The installation must be in accordance with the provisions of the country in which the unit is used. In case of any questions, please contact a qualified electrician
• You can not connect the unit to an electrical outlet using an extension cord.
• If the socket is not available, the installation should be performed by a qualified electrician
• Keep out of the reach of children
• Do not clean the unit by spraying or immersion in water
• Do not insert any objects into the unit through the openings
• Disconnect the unit from the mains before cleaning the unit or any of its parts.
WARNING!
• Do not start the machine if the cable or plug is damaged
• Do not lead the cable over sharp edges
• Damaged power cable must be replaced by the manufacturer, its service agent or a qualified person in order to avoid danger
• Activities other than regular cleaning or filter replacement should be performed by an authorized service. Failure to do so may result in loss of warranty protection.

TECHNICAL DATA

MODEL
VOLT (V)
RATED POWER - COOLING
RATED POWER - HEATING
COOLING CAPACITY
HEATING CAPACITY
DEHUMIDIFICATION CAPACITY (30°C, RH80%)
NOISE
AIR CIRCULATION max. - min.
COOLING AGENT
REMOTE CONTROL
TIMER
AUTO RESTART
PROTECTION CLASS IP
DIMENSIONS W x D x H
WEIGHT
FSC09.1
This unit in hermetically seald and contains the fluorinated gas:
R410a – 410g CO2 - 856 kg
FSC09.1
220V 50 Hz AC
0.95 kW
2,6 kW / 9.000 BTU
2,6 kW / 9.000 BTU
50 l/24h
400 m3 - 280 m3/h
300 x 526 x 624 mm
GWP - 2088
1.1 kW
62 db
R410a
YES
0-24h.
YES
IP 23
25 kg
FSC14.1/FSC14.1T
This unit in hermetically seald and contains the fluorinated gas:
R410a – 455g CO2 - 950 kg
11
FSC14.1 / FSC14.1T
220V 50 Hz AC
1.7 kW
1.58 kW
4,0 kW / 14.000 BTU
4,0 kW / 14.000 BTU
70 l/24h
65 db
480 m3 - 350 m3/h
R410a
YES
0-24h.
YES
IP 23
300 x 550 x 760 mm
30,5 kg
GWP - 2088