Specifications; Power Requirements; Weight And Dimensions - CLASSE CDP.3 Bedienungsanleitung

CDP.3 SPECIFICATIONS
Wow and Flutter
Jitter
Digital outputs
Frequency response
Signal to noise
D/A
Dynamic range
THD+Noise
Channel separation
Offset voltage
Clock Jitter
Laser semiconductor
Sampling rate
Disc rotation velocity
Quantization
Error correction
Number of channels

POWER REQUIREMENTS

Europe/UK
Canada/USA/Japan

WEIGHT AND DIMENSIONS

Dimensions: Gross
Net
Weight: Gross
Net
Operating temperature
Storage temperature
Operating position
Below measurement level
Below measurement level
SINGLE-ENDED on RCA connector
75 ohms, 0.5 Volt peak to peak output
DC to 20 Khz, + 0.1 dB, 20khz 1.4 dB.
-100 dB typical
Burr Brown 20 bit PCM 1702
16 bit linear
Better than -90dB @ 1Khz
Better than -100 dB @ 1Khz
Better than ± 0.005 VDC
Less than 50 picoseconds RMS, 20Hz to 40Khz
GaAIAs, 0.5 mw, continuous, 790 nm
352.8 Khz
200-500 rpm (constant linear velocity)
16 bits linear
CIRC principle
2 channels, stereo
180-260 VAC, 50 Hz, 18 Watts typ.
90-130 VAC, 60 Hz, 18 Watts typ.
25"x 19 1/2" x 9 (63.5x50x23)cm
19" x 12 7/8" x 3 3/4" (48.2x32.7x9.5)cm
24 lbs. (10.9kg)
20 lbs. (9kg)
0ºC to + 40ºC
-20ºC to + 60ºC
Horizontal, up to ±5º inclination in any direction
17