Specifications; Power Requirements; Weight And Dimensions - CLASSE CDP-10 Bedienungsanleitung

CDP-10 SPECIFICATIONS
Wow and Flutter
Digital output
Frequency response
Signal to noise
D/As
Dynamic range
THD+N
Channel separation
Offset voltage
Clock Jitter
Laser semiconductor
Sampling rate
Disc rotation velocity
Quantization
Error correction
Number of channels

POWER REQUIREMENTS

Europe/UK
Canada/USA/Japan

WEIGHT AND DIMENSIONS:

Dimensions (W x D x H):
Gross
Net
Weight:
Gross
Net
Operating temperature
Storage temperature
Operating position
Below measurement level
S/PDIF on RCA connector
75 ohms, 0.5 Volt peak to peak output
DC to 20 Khz, + 0.1 dB, 20khz 1.4 dB.
-100 dB typical
2x Burr Brown PCM1738
16 bit linear
Better than -90dB @ 1Khz
Better than -100 dB @ 1Khz
Better than ± 0.005 VDC
Less than 2 picoseconds RMS, 20Hz to 40Khz
GaAIAs, 0.5 mw, continuous, 790 nm
352.8 Khz
200 – 500 rpm (constant linear velocity)
16 bits linear
CIRC principle
2 channels, stereo
180 – 260 VAC, 50 Hz, 18 Watts typ.
90 – 130 VAC, 60 Hz, 18 Watts typ.
25"x 20" x 9" (63.5 cm x 50.8 cm x 22.8 cm)
19" x 16" x 3.75"
(48.2 cm x 40.7 cm x 7 cm)
24.3 lbs. (11 kg)
17.5 lbs. (8.9kg)
0ºC to + 40ºC
-20ºC to + 60ºC
Horizontal, up to ±5º inclination in any direction
26