SmartDisk FireLite Benutzerhandbuch Seite 2

Connecting FireLite
If your computer is running a recent operating system*, installing your FireLite is
extremely simple – just use the included mini-USB cable to connect your FireLite to
any free USB port on your computer. On Windows computers, a new icon will appear
in My Computer representing your FireLite. On Mac OS systems, your FireLite will
appear on the desktop as a new disk.
If you connect your FireLite and it doesn't appear to power up, you may need to check
the power settings. See the next section for more details.
* If your computer is running Windows 98 Second Edition, you'll need some additional software to use your FireLite.
Refer to the Getting Help section below.
Powering FireLite
The power source for your FireLite is selected with the switch on the back of the unit.
When the switch is in the USB position (towards the USB connector), the FireLite will
attempt to draw power from USB. When the switch is in the EXT position (towards the
external power connector), the FireLite will draw power from an external power source.
Some computer systems may not provide enough power through USB to operate
FireLite – in this case you must use an external power source.
The included auxiliary power cable allows you to power your FireLite using the PS/2
(Mouse or Keyboard) connector found on most PCs. If your system doesn't provide
enough USB power to use FireLite, try setting the switch to EXT and connecting the
auxiliary power cable. If your PS/2 port is also underpowered, or if your system lacks a
PS/2 port, you may need to purchase the optional AC Power Adapter (Model ACFLB).
Visit SmartDisk.com for more information.
Note: Only the included auxiliary power cable or the SmartDisk 5 volt ACFLB AC Power
Adapter should be connected to the external power connector on your FireLite. Using any
other power adapter (including higher voltage power adapters intended for other SmartDisk
portable hard drives) will void your warranty and may result in injury, damage to your FireLite,
or loss of data.
Storing and Transferring Data
Once your FireLite is connected to a computer, it can be accessed and used like any
other removable disk. You can drag files to your FireLite's icon to copy them, navigate
to your FireLite in Open or Save dialog boxes, or delete files stored on your FireLite.
For information on copying, opening, or deleting files, consult your computer's documentation.
Disconnecting FireLite
Your FireLite is hot-pluggable; it can be connected and disconnected without restarting
your computer. To disconnect your FireLite at any time, simply repeat the following
steps. You can also disconnect your FireLite at any time while your computer is powered off.
Note: Please be careful to follow the correct procedure when disconnecting your FireLite.
Simply unplugging the FireLite without first following the instructions below or shutting down
your computer may result in damage to your FireLite and/or loss of data.
For Windows Users:
1. If you have files located on your FireLite open in any applications, close them.
2. Click the Unplug or Eject Hardware button in the System Tray.
3. A menu will display containing either Stop USB Disk or Stop USB Mass Storage
Device, depending on what version of Windows your computer is running. Click
on whichever item appears.