Sharp KF-76IDD19W-DE Bedienungsanleitung Seite 29

Full-Automatic Programming:
d u r
A
This function is used to cook food after
a certain period of time, within a certain
duration. The food to be cooked is put
into the oven. The oven is adjusted to
the desired cooking function. The oven
thermostat is adjusted to the desired
degree depending on the dish to be
cooked.
First, keep pressing the MODE button
until you see "stop" on the timer
screen. When you see "stop" on the
timer screen, the symbol (A) will begin
to flash. Adjust the cooking period for
the food you wish to cook, by using
the (+) and (-) keys while the timer is
in this position. Some time after the
adjustment operation is completed, the
day's time will appear on the screen
and the symbols (A) and will begin to
continuously light on the screen.
A cooking period between the
time range of 0 and 10 hours
can be set.
A
Second, keep pressing the MODE
button until you see "end" on the timer
screen. When you see "end" on the
timer screen, the symbol (A) and the
cooking end time begin to flash. Adjust
the finishing time for the food by using
the (+) and (-) keys while the timer is
in this position. Some time after the
adjustment operation is completed, the
day's current time will appear on the
screen and the symbol (A) will begin to
light continuously on the screen.
You can set a time which can
be up 23.59 hours after the
time obtained by adding the
cooking period and the current
time.
The oven will start operating at the
time calculated by deducting the
cooking period from the set finishing
time, and will stop at the set finishing
time. The timer will give an audible
warning and the symbol (A) will begin
to flash. After bringing the oven button
and oven thermostat button to the 0
position, pressing any button of the
EN - 22
En d