Hinweise zur Montage
Anbauort so wählen, dass die
Abtasteinheit auf keinen Fall an
die Gehäusedeckel stoßen kann.
Anbaulage so wählen, dass Dichtlippen vor Verschmutzung
geschützt sind.
6
Choose a mounting position to
ensure that the scanning unit
cannot touch the end sections.
Mounting Procedure
Bei vertikalem Anbau ohne
Druckluft-Anschluss die Drainage-
Schraube entfernen.
Mount with sealing lips facing away from possible sources of
contamination.
When mounting vertically,
remove the drain screw if
compressed air is not used.