Nikon FSA-L2 Bedienungsanleitung Seite 11

Mounting and dismounting
Mounting
Insert the FSA-L2 into the EDG Fieldscope aligning the
1
mounting/dismounting indexes of both sides.
Screw in the FSA-L2 in the direction of the arrow until
2
you hear a click.
3
Attach the camera to the FSA-L2, alignng the camera
mounting/dismounting indexes.
4 First loosen the clamp screw. Then align the two camera
position indexes, and tighten up the clamp screw to
make the camera position horizontal.
*Please refer to the complete image showing correct mounting on page 2.
3
2
1
Shooting precautions
・ Depending on the shooting conditions, vignetting may occur. Vignetting may not completely disappear.
・ Focus using the focusing ring on the Fieldscope while viewing the camera's finder.
・ With high-magnification shooting, the focal depth is low. Be sure to focus carefully.
・ With high-magnification shooting, you can prevent vibrations by using a self-timer or a remote controller.
・ Camera position may become misaligned during camera operation. Before releasing the shutter, adjust the camera if
necessary.
・ Do not use flash when shooting.
3
2
Dismounting
Remove the camera by pressing the lens
1
mounting/dismounting button.
2 Slide the mounting/dismounting lever in the
direction of the arrow, and keep it in position.
3
Rotate the body in the direction of the arrow, and
remove the FSA-L2.
1
4
Jp
En
De
Fr
Es
It
Ru
No
Se
Fi
Nl
Dk
Ro
Pl
Hu
Cz
11