Symbol RS 1 Schnellreferenzhandbuch Seite 8

R S
Using the Scanner
1. Power the scanner on by pressing the trigger.
2. Aim the scanner at the bar code and press the trig-
ger. The LED turns red to indicate the scanner is
on.
3. Adjust the aim so that the thin, red laser beam cov-
ers the entire length of the bar code.
4. If the decode is successful, the screen displays the
code and the LED turns green. The terminal may
also beep.
1 S c a n n e r
Right
012345
Wrong
012345
6