Operating Instructions; Preparing The Nebuliser For Use - Omron Comp Air NE-C28-E Gebrauchsanweisung

NE-C28.book Page 10 Monday, October 23, 2006 3:40 PM

Operating instructions

3. Preparing the nebuliser for use

Warning:
Clean and disinfect the nebuliser kit, mouthpiece and optional nosepiece or
masks before using them for the first time after purchase, if the device has
not been used for a long period of time, or if more than one person uses the
same device.
For directions on cleaning and disinfecting the parts of the device refer to Section 5
in this instruction manual.
Note: Make sure that the air filter is changed regularly. (See Section 7 "Changing
the air filter".)
1.
Make sure that the power switch is turned off.
Check that the power switch is
in the position.
2.
Plug the power plug into a power outlet.
3.
Remove the mouthpiece and cap from the
nebuliser kit.
4.
Remove the inhalation top from the medication
tank.
1)
Rotate the inhalation top anti-clockwise.
2)
Lift the inhalation top out of the medication
tank.
10
Power Plug
2
1