Adjusting The Air Flow Direction; Plasmacluster Operation - Sharp AY-XPC12RR Bedienungsanleitung

ADJUSTING THE AIR FLOW
DIRECTION
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button (
• The vertical airfl ow louver will swing.
2
Press the SWING button (
to stop at the desired position.
HORIZONTAL AIR FLOW DIRECTION
1
Press the SWING button (
• The horizontal airfl ow louver will swing.
2
Press the SWING button (
to stop at the desired position.
CAUTION:
Never attempt to adjust the louvers manually.
• Manual adjustment of the louvers can cause
the unit to malfunction.
• When the vertical adjustment louver is
positioned at the lowest position in the
COOL or DRY mode for an extended
period of time, condensation may result.
NOTE:
• The adjustment range is narrower than
the SWING range in order to prevent
condensation from dripping.

PLASMACLUSTER OPERATION

The Plasmacluster ion generator inside
the air conditioner will release positive and
).
negative Plasmacluster ions into the room
to reduce airborne mold.
1
) again
During operation, press the
PLASMACLUSTER button.
1
• The remote control will display "
• The blue PLASMACLUSTER lamp (
2
will light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The blue PLASMACLUSTER lamp (
will turn off.
).
) again
1
2
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the next
time you turn on the unit.
• To perform Plasmacluster operation in FAN
only mode, press the PLASMACLUSTER
button when the unit is not operating.
The mode symbol of the remote control will go
off and the fan speed cannot be set to AUTO.
• Plasmacluster is Sharp's original technology.
For more information, please visit:
http://www.sharp-pci.com/en/
GB-7
".
)
)
1