Tektronix TDS2MEM Benutzerhandbuch Seite 10

Using the TDS2MEM Storage Memory and Communications Module
Installing and Removing the CompactFlash Card
Insert a Type 1 CompactFlash card into the slot until the card is flush
with the module case, as shown below. The CF card is keyed to be
inserted only one way. If the CF card does not easily slide into place,
remove and correctly reinsert it.
Eject button
Card
To remove the CompactFlash card, push and release the eject button
until the button fully extends, then push the eject button again to
release the CF card from the slot. Pull the CF card out of the
module slot.
2
Back side of card
Lip
TDS2MEM User Manual