ASROCK Z68 Extreme7 Gen3 Bedienungsanleitung Seite 22

2.5.1.2 Installing Three SLI
Step 1. Install the identical 3-Way SLI
certifi ed because different types of graphics cards will not work together
properly. (Even the GPU chips version shall be the same.) Each graph-
ics card should have two goldfi ngers for the 3-Way SLI Bridge connector.
Insert one graphics card into PCIE1 slot, another graphics card to PCIE4
slot, and the other graphics card to PCIE6 slot. Make sure that the cards
are properly seated on the slots.
Two Goldfi ngers
Step2. Connect the auxiliary power source to the PCI Express graphics card.
Please make sure that both power connectors on the PCI Express graph-
ics card are connected. Repeat this step on the three graphics cards.
Step3. Align and insert ASRock 3-Way SLI-2S2S Bridge Card to the goldfi ngers
on each graphics card. Make sure ASRock 3-Way SLI-2S2S Bridge Card
is fi rmly in place.
ASRock 3-Way SLI-2S2S Bridge Card
Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI
connector of the graphics card that is inserted to PCIE1 slot.
22
ASRock Z68 Extreme7 Gen3 Motherboard
TM
-Ready Graphics Cards
TM
-ready graphics cards that are NVIDIA
®