Replacing The Battery; Accessories - USAG 075 F Bedienungsanleitung

Replacing the battery

(3 batteries, 1.5V, AAA)
Warning. – Before opening the cover of the battery compartment,
make sure that the leads are disconnected from the measurement
circuit. Close the compartment before using the instrument.
• If the " "con appears on the display, the batteries shall be replaced.
• To replace the batteries, proceed as follows:
• Disconnect the leads from any source, turn off the instrument and remove
the leads from the bushings.
• Remove the door of the battery compartment at the back of the instrument,
replace them with equivalent batteries, and close the battery compartment
again.
Accessories (provided)
• Couple of leads
• Temperature sensor (type K)
• Nylon bag for transport
• Operating instructions
24