Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
4. Low battery notification function
Displays warning about low battery status on the
phone and a need to connect to the charging. At
the same time, it can send information to 3 preset
numbers that the phone needs to be charged.
Note: For more detailed information about setting
up these features in your phone, see our extended
manual on www.iget.eu.
Charging the battery:
Before putting your phone into service you must
recharge its battery for 100%.
1. Connect the charger connector into the cradle
(17). Do not use the force when connecting.
2. Connect the charger to the wall outlet, then
insert the phone into the cradle (16) – contacts to
contacts.
3. When the battery is fully charged, remove the
phone from the cradle (16).
Note: The phone can also be charged directly from
the charger without using a cradle. Your phone can
be charged switched on, or switched off.
42
Werbung
