SEAT
To remove the seat (1), insert the ignition
key into the seat lock (2) and turn it
clockwise. Pull the seat back and up. To
install the seat, insert the prong into the
recess under the frame cross member and
then push down on the rear of the seat.
CAUTION:
*
Be sure the seat is locked securely in
position after installation.
DOCUMENT COMPARTMENT
The document bag is placed underneath the
seat inside the tray beside the tool bag. To
access the document, pull the tray out.
This owner's manual and other documents
should be stored in this compartment.
When washing your motorcycle, be careful
not to flood this area with water.
(1) Seat
32
(2) Seat lock
(1)
Document compartment