Clutch - Honda CB750F2 Fahrerhandbuch

CLUTCH
Clutch adjustment may be required
if
the
motorcycle stalls when shifting into gear or
tends to creep; or if the clutch slips, causing
acceleration to lag behind engine speed.
Minor adjustments can be made with the
clutch cable adjuster (4) at the lever (1).
Normal clutch lever free play is:
10~20 mm (0.4-0.8 in)
(1) Clutch lever
1.
Pull back the rubber dust cover (2).
Loosen the lock nut (3) and turn the
adjuster (4). Tighten the lock nut (3)
and check the adjustment.
2. If the adjuster is threaded out near its
limit or if the correct free play cannot be
obtained, loosen the lock nut (3) and turn
in the cable adjuster (4) completely.
Tighten the lock nut (3) and install the
dust cover.
(2) Dust cover (A) Increase free play
(3) Lock nut (B) Decrease free play
(4) Clutch cable adjuster
17