Operation - OHAUS RANGER 3000 Bedienungsanleitung

RS232 Interface

OPERATION

RS232 OUTPUT
With the Adapter installed the balance will operate in one of the following three ways:

Auto Print = off, Stable = on or off
Pressing PRINT will send the display data.
If Stable is set to On, the balance will wait for a stable reading before sending data.

Auto Print = not off, Stable = on or off
The balance will automatically send data based on the settings in the Menu.
If Stable is set to On, only stable values will be sent.
Data sent from the Interface is in standard ASCII format terminated with a [CRLF] (carriage return-
line feed). The output format is as follows:
[weight]
[space]
[unit]
[space]
[stability indicator]
[space]
[G/N]
Output example:
Weigh Mode Printout
11.11 kg NET
12.34 kg G
11.11 kg NET
1.23 kg T
MODE: WEIGH
<no line printed>
RS232 INPUT
The balance will respond to various commands sent via the interface adapter. Terminate the
following commands with [CRLF].
9 characters (right justified)
1 character
5 characters max (left justified)
1 character
1 character "?" when unstable, blank when stable
1 character
1 character
Description
Result line
Gross value
line
Net value
line
Tare value
line
Mode line
Information
line
Comment
If Printx  Content  Result is ON
If Printx  Content  Gross is ON and a tare value is
entered
If Printx  Content  Net is ON and a tare value is
entered
If Printx  Content  Tare is ON and a tare value is
entered
If Printx  Content  Application Mode is ON
If Printx  Content  Into is ON
EN-3