Renkforce 1712588 Bedienungsanleitung Seite 25

If no water is pumped, there is still air in the clear water pump and in the hose. If necessary, you can speed up
the suction process by adding water to the hose or by moving the clear water pump slightly back and forth, or by
plugging/unplugging the mains plug.
• The clear water pump turns off automatically when the float switch goes down.
The clear water pump can also be operated manually by attaching the cable of the float switch to the cable
clamp.
The clear water pump may not be operated unattended here, since the clear water pump does not switch
off in the absence of water, leading to its damage.
In any case, make sure that the pump does not run dry as it has no dry run protection.
• Please also note the following pictures for the operation of the clear water pump.
OFF
ON
B
A
Particle size
5 мм
(For information only, pictures of the pump may differ)
25