Valve Assembly - Vexve AM40 Bedienungsanleitung

Valve assembly

Connect motor(s) to mixing valve with
included connection adapters.
Motor units are suitable for valves like:
MUT, ESBE (not VRG), LK, Belimo, Barberi,
Vexve.
Vexve AMV range:
The pin is already in the right-hand side of
the valve. Only the Termomix adapter from
the installation kit should be installed on the
stem. The pin side may be changed if the
engine position requires it.
Place valve and motor unit in zero position.
6
A
Esbe VRG serie valves has separate
adapter part available (Vexve nr.1920117)
( A ) Check the valve operational direction
before installation.
( B ) In manual mode check that valve/
motor combination turn 90-degrees with
reasonable torque!
B
Termomix valves:
A suitable pin screw and adapter from the
installation kit should be installed.
www.vexve.fi.