Vexve AM40 Bedienungsanleitung Seite 14

Adding second heating circuit
For controlling second heating circuit with
AM40 You need second valve motor and
supply water temperature sensor
Product nr. 1140042: Pack B, heating
circuit 2 motor package includes all
necessary parts
Mechanical assembly:
Mechanical assembly is same as in heating
circuit 1 except:
Motor Unit connected to M2 connector.
Supplywater sensor connect to IN2
connector.
A
( A ) Check the valve operational direction
before installation.
( B ) In manual mode check that valve/
motor combination turn 90-degrees with
reasonable torque!
12
B
After mechanical assembly press button 1
two times to reach the Main menu
Up/down buttons (5) are used for moving in
menus OK button (4) is for enter / accepting
values.
button is for undo/exit.
Main menu >> go to Device settings >> go
to H2 options
www.vexve.fi.