Product Description; Transport; Technical Data - Dea LIVI 3/24 Bedienungsanleitung Und Hinweise

2 PRODUCT DESCRIPTION

Models and contents of the package
All automated models involve the use of advanced control units (NET series) equipped with anti-crushing sensor, built-in 433 MHz
radio receiver, speed control and slow down in opening and closing. The LIVI 3/24 models are intended primarily for residential / condo-
minium and Semi-intensive/intensive use depending on the duty cycle foreseen for the automation.
LIVI 3/24 is completed by a set of accessories listed in the "PRODUCT ACCESSORIES" table (page 166).
LIVI 3/24 is composed of a mechanical gear motor which rotates the driving gear; This gear, coupled to the rack properly installed on
the gate, converts the circular motion of the gear motor into rectilinear motion thus allowing the movement of the gate on its own guide.
Inspect the "Contents of the Package" (Pic. 1) and compare it with your product for useful consultation during assembly.

Transport

LIVI 3/24 is always delivered packed in boxes that provide adequate protection to the product, however, pay attention to all informa-
tion that may be provided on the same box for storage and handling.

3 TECHNICAL DATA

Motor power supply voltage (V)
Absorbed power (W)
Max Thrust (N)
Duty cycle (leaf L=5m)
Maximum n° of operations in 24 hour (leaf L=5m)
Max door weight (kg)
Operating temperature range (°C)
Opening speed (m/min)
Weight of product with package (Kg)
Sound pressure emitted (dBA)
Protection degree
Power supply (V)
Rated power transformer (VA)
Fuse F1 (A)
Stabilized output for auxiliary power supply
24V Flashing light output
"Warning" output
Receiver frequency
Transmitters type of coding
Max remote controllers managed
OPERATOR
CONTROL BOARD
220 - 240 V ~ ±10% (50/60 Hz)
24 V
HCS fix-code - HCS rolling code - Dip-switch (selectable)
3/24E/F
24 V
55
140
8 cycles/hour
20
350
-20÷50 °C
14
11,5
< 70
IPX4
NET3/24N
80 VA (230/22V)
T1A 250V (retarded)
max 200mA
24 V max 5 W
24 V max 5 W
433,92 MHz
100
23