Dmx Linking - Chauvet Intimidator Wash LED 150 Schnellanleitung

Intimidator™ Wash LED 150 QRG
Mounting
Product
Mounting
Diagram
Control Panel
Description

DMX Linking

Starting Address
Master/Slave
Connection
Before mounting this product, read the Safety Notes.
Bracket Attachment (x2)
Rubber Feet (x4)
Safety Loop Attachment Point
Button Function
<MODE/ESC> Exits from the current menu or function
Navigates upwards through the menu list and increases
<UP>
the numeric value when in a function
<DOWN> Navigates downwards through the menu list and
decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the
currently selected value into the selected function
The Intimidator™ Wash LED 150 QRG can work with a DMX controller when
linked by DMX serial connections. Instructions for connecting and configuring
this product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 497.
The Intimidator™ Wash LED 150 QRG uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product for
Master/Slave operation are in the User Manual.
Page 4 of 52
EN