Dmx Linking; Starting Address - Chauvet SlimPAR 64 RGBA Schnellreferenz

SlimPAR™ 64 RGBA QRG

DMX Linking

Starting Address

Master/Slave
Connection
DMX Values
8-CH
Channel Function
1
2
3
4
5
6
7
8
4-CH
Channel Function
1
2
3
4
All manuals and user guides at all-guides.com
The SlimPAR™ 64 RGBA can work with a DMX controller when linked
by DMX serial connections. Instructions for connecting and configuring
this product for DMX operation are in the User Manual. If you are not
familiar with DMX,
www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 505 (in the 8-channel DMX personality).
To select the starting address, do the following:
1. Press <MENU> repeatedly until 4-CH or 8-CH shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address (d001~d505).
4. Press <ENTER>.
The SlimPAR™ 64 RGBA uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this
product for Master/Slave operation are in the User Manual.
000  255 0~100%
Red
000  255 0~100%
Green
000  255 0~100%
Blue
000  255 0~100%
Amber
000  015
Color Macros
016  255
(Overrides Chs. 1~4)
Speed
000  255 Slow~fast
(When Ch. 7
is 032~223)
001  015
Strobe
016  255
000  031 RGBA mode
032  063 Pulse effect 0~100%
064  095 Pulse effect 100%~0
096  127 Pulse effect 100%~0~100%
Mode
128  159 Auto fade transition
160  191 Auto snap transition (4 colors)
192  223 Auto snap transition (15 colors)
224  255 Sound-active mode
000  255 0~100%
Dimmer
000  255 0~100%
Red
000  255 0~100%
Green
000  255 0~100%
Blue
000  255 0~100%
Amber
download the
Value Percent/Setting
No function
Color Macros
No function
Slow~fast
Value Percent/Setting
6
EN
DMX Primer from