Menu Options; Dmx Linking - Chauvet Intimidator Spot Duo Schnellanleitung

EN

Menu Options

Main Level
DMX Address
Automatic
Sound-Active
Slave
Sound Sensitivity
Master Auto
Pan 1
Pan 2
Tilt 1
Tilt 2
Display
Channel Mode
Pan Range
Tilt Range
Temperature Display
Reset
Load

DMX Linking

Starting
Address
Master/Slave
Connection
Programming Levels
d001~d512
A-01~A-16
Srun
Son1
Son2
S-01~S-99
M--4
M--2
PA1
rPA1
PA2
rPA2
til
rtil
ti2
rti2
dis
rdis
20CH
17CH
10CH
PA36
PA18
ti27
ti18
ti 9
t--1 (1txx)
t--2 (2txx)
rESt
LoAd
The Intimidator™ Spot Duo can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 493.
The Intimidator™ Spot Duo uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product
for Master/Slave operation are in the User Manual.
Intimidator™ Spot Duo QRG
Sets the DMX starting address
Automatic mode
Sound-Active mode
Slave operating mode 1
Slave operating mode 2
Sound sensitivity control
Master built-in 4-head program
Master built-in 2-head program
Normal pan operation for head 1
Reverse pan operation for head 1
Normal pan operation for head 2
Reverse pan operation for head 2
Normal tilt operation for head 1
Reverse tilt operation for head 1
Normal tilt operation for head 2
Reverse tilt operation for head 2
Normal display
Inverted display
20-channel DMX personality
17-channel DMX personality
10-channel DMX personality
360° pan range
180° pan range
270° tilt range
180° tilt range
90° tilt range
Displays LED temperature for head 1
Displays LED temperature for head 2
Resets product
Loads factory defaults
5
Description