Menu Options; Dmx Linking - Chauvet Intimidator Spot LED 250 Schnellanleitung

EN

Menu Options

Main Level
DMX Address
Operation Modes
Pan
Tilt
Display
Channel Mode
Manual Pan Restrict
Manual Tilt Restrict
Reset
Load

DMX Linking

Starting Address
Master/Slave
Connection
Programming Levels
001~512
SLAv (Son)
NASL (SLoU)
NAFA (FASt)
NStS (SrUn)
Normal Pan
Inverse Pan
Normal Tilt
Inverse Tilt
Normal Display
Inverse Display
13-Channel Mode
8-Channel Mode
º
Pan 540
º
Pan 360
º
Pan 180
º
Tilt 270
º
Tilt 180
º
Tilt 90
rESt
LoAd
The Intimidator™ Spot LED 250 can work with a DMX controller when
linked using a regular DMX serial connection. Instructions for connecting
and configuring this product for DMX operation are in the User Manual. If
you are not familiar with DMX, download the DMX Primer from
www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 502.
The Intimidator™ Spot LED 250 uses the DMX data connection for
Master/Slave mode. Instructions for connecting and configuring this product
for Master/Slave operation are in the User Manual.
Intimidator™ Spot LED 250 QRG
Sets the DMX starting address
Slave operating mode
Automatic Mode, Slow Program
Automatic Mode, Fast Program
Sound Active Mode
Normal Pan operation
PAn
Inverse Pan operation
r PAn
Normal Tilt operation
tiL
Inverse Tilt operation
r tiL
diS
Change the LCD display text position
r diS
13CH
Selects the DMX personality
8CH
PA54
Select Pan angle restrictions
PA36
PA18
Ti27
Select Tilt angle restrictions
Ti18
Ti 9
Resets product
Load factory defaults
5
Description